How to Make a Small Space Divider.
Room dividers can be a stylish and effective way of making the best use of a room, office, hall or other area in need of division. Small, impermanent dividers can be made easily by the novice DIYer, using objects that are easily obtainable. Choose one of the suggested methods below for an easy and very cheap way to create a unique space divider for your home, made by you.Method 1 Trellis divider.
This project is very simple and only needs about 30 minutes to complete.
1. Purchase a section of wooden trellis. It should be of a decent height (tall enough for it to make a break in vision, and if possible, higher than the average person).
2. Cut the wooden wall trellis into three equal pieces, vertically. These pieces will be joined together again in a way that allows them to be bent or folded.
3. Reattach the pieces to form the divider. Tie the first piece with the second piece, then tie the second piece with the third, using wire or rope.
4. Weave dried plant parts, one beside other, through the frame squares. Add more of this material until the plants completely cover the trellis.
The dried plant parts are best when they are of the same height (or longer) as the divider you are going to make.
Live plant vines could also be used but they're trickier and you will need to place the container growing the plant down in its final place before weaving. Moreover, moving the divider is much harder when you do this, so it's best for a more "permanent" divider, such as for an office.
Instead of dried plant parts, you can use artificial floral items, such as long leaves, etc.
5. Put the divider up where you need it. Angle the three partitions so that the divider stands in place unaided. Plant containers or similar weighted objects can be used to prevent the divider from falling over if accidentally knocked.
Things You'll Need.
A square wooden wall trellis, Saw or Jigsaw, Binding wire or rope, Wire cutter or scissors, Various dried plant parts,
Method 2 Shower curtain divider.
This easy divider has the benefit of easy pulling back when you need to space to be opened up again quickly.
1. Choose a shower curtain with a design you think is perfect for the space to be divided. If the area to be divided is longer than one curtain, choose another one or two in the same design.
If the design is stripes, spots or some other pattern, you might consider varying the colors, as long as they match nicely.
2. Hang up a line of strong wire across the area to be divided. Hang this either at ceiling height or above the area of a tall person walking through.
You may also like to attach a curtain tieback hook on a wall or area for ease of pulling the curtain back to one side if needed. This step is optional.
4. Hang the shower curtain across the wire. Pull the hung curtain across to create the divider.
Things You'll Need.
Shower curtain(s), Shower curtain hooks, Strong, thin wire, Hanging fittings, Screwdriver, hammer, Curtain tieback hook (optional).
Method 3 Vinyl records divider.
This is a rather funky room or space divider, perfect for a longer-term decorative space divider in a more modern style of home.
1. Find a bundle of old, unwanted vinyl records. The "unwanted" is an important part! Each record should be the same size, unless you're planning on deliberately using a big-small-big, etc. pattern. That's up to you.
The amount of records you'll need depends on how much space you are trying to cover. If you are hanging them from the ceiling to say, sofa level, count on about eight records of large size for the vertical drop, then as many of these rows of eight as you need to cover the space to be divided. This could be a lot of records, so visit the local thrift store if you haven't got that many stashed away.
2. Select a color of contact paper that suits your room or area. Contact paper is the best way to cover the records and make them all the same color.
Prints are also possible but bear in mind that your room decor must be matched nicely.
3. Measure a round section of contact paper over a record. This forms your template piece for records of that size. Use this to make as many circles as needed for the amount of records (one piece each side).
4. Carefully peel off the backing of the contact paper and apply to each side of the first record. Smooth out all bubbles and wrinkles so that the contact paper sits perfectly flat. Meet the edges of each side of each circle with care. Repeat for all records.
5. Use a long piece of thick wire, such as from a wire coat hanger, to make holes. Mark four holes at even quarter spaces around the edges of the record circle. Heat the wire at one end over a stovetop and use the hot end to piece holes through the marked spots.
Hold the wire with strong gloves, such as gardening gloves, in case it heats too much.
Repeat for each record.
6. Join the divider together. Use medium gauge wire to make ring joins between the holes, closing the wire with pliers. Cut the same lengths of wire for the entire project, although you may wish to make large rings for the top level rings, depending on the hook requirements from the hanging points.
Make rows first, according to the measurement needed for your space.
Then join the rows to form the entire hanging divider.
Ensure that the top row has rings too, so that it can be hung from the ceiling, beam or other area, with ease.
7. Hang the divider. Use planter hooks from the ceiling over the area in need of the divider, either with a piece of chain to add length or directly hang the divider straight from the hooks. It is important to have at least one helper to do this part, as hanging can be tricky.
8. Done. You now have an amazing, funky divider for your room or area.
Things You'll Need.
Vinyl records, in sizes preferred, as many as needed for length and width of area.
Pencil or other marker for measuring the record size onto the contact paper.
Scissors for contact paper circles, Medium gauge wire for making rings.
Tin snips or similar for cutting ring lengths, Contact paper in color of choice.
Pliers, Wire for making holes, or a coat hanger, A helper for hanging the divider.
Tips.
For the first method project, choose any size of wall trellis you think is appropriate for your project, as long as it covers what you want covered.
Warnings.
In method 1, instead of binding the pieces with wire or rope, you might consider trying to nail or screw hinges; however if the quality of the wood is poor, these will not work well, if at all.
Take care when burning holes into the vinyl records; wear gloves to protect your hands and keep your distance from the heat. Keep children and pets out of the way while working with the stove top in this project.
